Description
During field installation, you don’t need to take off the dust cap, after deploy the cable in place, only unscrew off the metal head, then put on the white body and green housing of the SC connector, it can finish installation, no need special tools, and which ensure the ceramic ferrule in clean and good optical performance. Meanwhile, there is pulling eye for the rope to pull at head of the housing and flexible rotating in any angel. The metal head is made of high quality and durability copper or zinc alloy material, which ensure the connector and fiber in good condition after pulling. And it is ideal solution for ftth upgrade network or access network.
Features
- Fast and convenient to operate, no need special tools
- Special design for limited space less than 8mm
- Unique crimping ensure high tensile strength
- Compatible with general SC interface
Specification
| Connector type | SC |
| Fiber type | G652D, G657A2, G657A1, G655, G657B3, OM1 OM2 OM3 OM4,OM5, etc. |
| Wavelength | 1260-1650nm |
| Fiber cores | 1 core, 2 cores or multi-fiber |
| Cable diameter | Φ3mm,Φ2.6mm, Φ2.4mm, Φ2.0mm,Φ1.6mm, Φ0.9mm or custom |
| Polish method | UPC, PC, APC（8°）, SPC |
| Cable color | Yellow, white, blue, green, grey, red, black, aqua, orange, purple, etc. |
| Fiber radius of curvature | ≥ 40 mm (G.652D and G.655C); ≥ 20 mm (only G.657A2) |
| Insertion loss | ≤ 0.1dB (Master)
≤ 0.3dB (Standard) Tested by JDS RM 3750 |
| Return loss | UPC ≥ 55dB,APC ≥ 60dB (typ.65dB)–Single mode
UPC≥ 35dB (typ.38dB)-Multimode Tested by JDS RM3750 |
| Repeat ability | ±0.1dB |
| Operating temperature | -40 ° C to 85 ° C |
| Geometry Requirement
(For Single mode) |
Ferrule End face Radius:
7mm ≤ R ≤ 12mm (APC) 10mm ≤ R ≤ 25mm (Standard) Apex Offset ≤ 30 μm (Master) Apex Offset ≤ 50 μm (Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 |
Reviews
There are no reviews yet.